https://community.hpe.com/t5/disk-enclosures/cpqfc-o-driver-for-linux/m-p/2973587#M8453 I am attempting to build this driver for a redhat 2.4.18-27.7.xsmp system. <BR /><BR />The module appears to build ok, but it will not load because of bad command line options possibly.<BR /><BR />Has anyone done this? Or is there a way to tell which FC card I have? It is an older one but is recognized by the ACU utility.<BR /><BR />I am attempting to do this on a Compaq DL320 btw.<BR /><BR />Any help is appreciated,<BR />Bill Lewis Wed, 14 May 2003 18:38:10 GMT WilliamLewis 2003-05-14T18:38:10Z https://community.hpe.com/t5/disk-enclosures/cpqfc-o-driver-for-linux/m-p/2973587#M8453 I am attempting to build this driver for a redhat 2.4.18-27.7.xsmp system. <BR /><BR />The module appears to build ok, but it will not load because of bad command line options possibly.<BR /><BR />Has anyone done this? Or is there a way to tell which FC card I have? It is an older one but is recognized by the ACU utility.<BR /><BR />I am attempting to do this on a Compaq DL320 btw.<BR /><BR />Any help is appreciated,<BR />Bill Lewis Wed, 14 May 2003 18:38:10 GMT https://community.hpe.com/t5/disk-enclosures/cpqfc-o-driver-for-linux/m-p/2973587#M8453 WilliamLewis 2003-05-14T18:38:10Z