https://community.hpe.com/t5/disk-enclosures/problems-with-smart-array-5300/m-p/2984983#M8589 Hello,<BR />I have installed a smart array 5300 with the last web package firmware but while booting display a message "scsi drive firmware update recommended"... and after, the boot is stopped waiting for F1 or F10 key pressed but it is already cofigured as a primary controller. if I press F10 display a message "...smart array 532 had been configured as primary controller", I saved it but is not working.... Could you tell me anything about it? Fri, 30 May 2003 07:01:13 GMT Angel Fontana 2003-05-30T07:01:13Z https://community.hpe.com/t5/disk-enclosures/problems-with-smart-array-5300/m-p/2984983#M8589 Hello,<BR />I have installed a smart array 5300 with the last web package firmware but while booting display a message "scsi drive firmware update recommended"... and after, the boot is stopped waiting for F1 or F10 key pressed but it is already cofigured as a primary controller. if I press F10 display a message "...smart array 532 had been configured as primary controller", I saved it but is not working.... Could you tell me anything about it? Fri, 30 May 2003 07:01:13 GMT https://community.hpe.com/t5/disk-enclosures/problems-with-smart-array-5300/m-p/2984983#M8589 Angel Fontana 2003-05-30T07:01:13Z