https://community.hpe.com/t5/disk-enclosures/smart-array-controller-5300/m-p/2991543#M8658 I have proliant ML530 server, in which array controller is defective.can I just replace a new card or what are the steps that I have to take before replacing the card.( system with NT4, RAID 5) Sat, 07 Jun 2003 14:47:27 GMT Rajan_6 2003-06-07T14:47:27Z https://community.hpe.com/t5/disk-enclosures/smart-array-controller-5300/m-p/2991543#M8658 I have proliant ML530 server, in which array controller is defective.can I just replace a new card or what are the steps that I have to take before replacing the card.( system with NT4, RAID 5) Sat, 07 Jun 2003 14:47:27 GMT https://community.hpe.com/t5/disk-enclosures/smart-array-controller-5300/m-p/2991543#M8658 Rajan_6 2003-06-07T14:47:27Z https://community.hpe.com/t5/disk-enclosures/smart-array-controller-5300/m-p/2991544#M8659 You need to contact customer support and get it replaced under warranty. Sun, 08 Jun 2003 15:13:35 GMT https://community.hpe.com/t5/disk-enclosures/smart-array-controller-5300/m-p/2991544#M8659 e4services 2003-06-08T15:13:35Z https://community.hpe.com/t5/disk-enclosures/smart-array-controller-5300/m-p/2991545#M8660 The information about disks and configuration is stored both on the disks and the array controller. It is safe to change the controller without any actions in NT4.0 (besides the backup, if possible) Mon, 16 Jun 2003 13:51:03 GMT https://community.hpe.com/t5/disk-enclosures/smart-array-controller-5300/m-p/2991545#M8660 John Drescher 2003-06-16T13:51:03Z