https://community.hpe.com/t5/disk-enclosures/configuring-additional-logical-drives/m-p/2481562#M880 I don't know the SCSI ID and logical unit number (LUN) to configure my additional logical drives through "mkdev hd", after configuring them using SmartStart. Thu, 11 Jan 2001 00:00:00 GMT Ayman Altounji 2001-01-11T00:00:00Z https://community.hpe.com/t5/disk-enclosures/configuring-additional-logical-drives/m-p/2481562#M880 I don't know the SCSI ID and logical unit number (LUN) to configure my additional logical drives through "mkdev hd", after configuring them using SmartStart. Thu, 11 Jan 2001 00:00:00 GMT https://community.hpe.com/t5/disk-enclosures/configuring-additional-logical-drives/m-p/2481562#M880 Ayman Altounji 2001-01-11T00:00:00Z https://community.hpe.com/t5/disk-enclosures/configuring-additional-logical-drives/m-p/2481563#M881 You must first create the logical array volume using the Compaq array configuration utility. When the "ida" driver was installed into the OS, all the device nodes were created for the logical drives, so you do not need to use the "mkdev hd" command. Just use the "mkdev fs" command with the correct device name for the logical drive. Tue, 03 Apr 2001 23:00:00 GMT https://community.hpe.com/t5/disk-enclosures/configuring-additional-logical-drives/m-p/2481563#M881 Ayman Altounji 2001-04-03T23:00:00Z