Extending Raid0 to Raid1

kevin whiteman — Thu, 10 Jul 2003 10:29:17 GMT

Does any one have any experience of upgrading a single 9GB (Raid 0)to become a mirrored pair (RAID 1)? We have tried to do this under windows 2000 but reached an impasse where data loss was possible. Ideally I want to do this on the fly without having to rely on a backup. I have the Ingerated Smart Array controller in a compaq DL 360 and version 2.7 of compaq array configuration utility. Any experience or ideas would be greatly appreciated

Kevin

Re: Extending Raid0 to Raid1

Marino Meloni_1 — Thu, 10 Jul 2003 20:13:48 GMT

hi,
you just need to perform a raid migration at a hardware level, use ACU or ACU/XE in order to perform it. Migration is OS indipendent

http://h71025.www7.hp.com/support/reference_library/viewdocument.asp?countrycode=1000&prodid=2045|Smart+Array+5i+Controller&source=TC021003TB.xml&dt=21&docid=12362

topic Re: Extending Raid0 to Raid1 in Disk Enclosures

Extending Raid0 to Raid1

Re: Extending Raid0 to Raid1