https://community.hpe.com/t5/disk-enclosures/nike-10-boot-from-raid-1-mirror-on-r11-0/m-p/2482561#M913 I built a R11.0 system from make_recovery tape<BR />seemingly successfully, but cannot boot system. This is an E55 which booted from the Nike in previous releases. Sun, 14 Jan 2001 23:19:45 GMT Joe Odman 2001-01-14T23:19:45Z https://community.hpe.com/t5/disk-enclosures/nike-10-boot-from-raid-1-mirror-on-r11-0/m-p/2482561#M913 I built a R11.0 system from make_recovery tape<BR />seemingly successfully, but cannot boot system. This is an E55 which booted from the Nike in previous releases. Sun, 14 Jan 2001 23:19:45 GMT https://community.hpe.com/t5/disk-enclosures/nike-10-boot-from-raid-1-mirror-on-r11-0/m-p/2482561#M913 Joe Odman 2001-01-14T23:19:45Z https://community.hpe.com/t5/disk-enclosures/nike-10-boot-from-raid-1-mirror-on-r11-0/m-p/2482562#M914 Hello,<BR /><BR />I don't think that HPUX 11.0 features boot support for nike model 10.<BR /><BR />Regards,<BR /> Tue, 16 Jan 2001 09:26:47 GMT https://community.hpe.com/t5/disk-enclosures/nike-10-boot-from-raid-1-mirror-on-r11-0/m-p/2482562#M914 Insu Kim 2001-01-16T09:26:47Z https://community.hpe.com/t5/disk-enclosures/nike-10-boot-from-raid-1-mirror-on-r11-0/m-p/2482563#M915 Found out that you can boot R11 from Nike Array. Boot partition must be on LUN 0. Tue, 13 Feb 2001 17:13:27 GMT https://community.hpe.com/t5/disk-enclosures/nike-10-boot-from-raid-1-mirror-on-r11-0/m-p/2482563#M915 Joe Odman 2001-02-13T17:13:27Z