https://community.hpe.com/t5/disk-enclosures/hot-spare-joining-array/m-p/2482643#M919 I have a ProLiant ML350 with a 431 Array controller. I currently have a RAID 5 with 3 active disks and a hot spare. I would like to add the hot spare to the active array. I am assuming that I can just load the on-line array utility and make the change, is this correct? Anyone done this and have some words of wisdom? Thanks in advance. Mon, 15 Jan 2001 00:00:00 GMT Ayman Altounji 2001-01-15T00:00:00Z https://community.hpe.com/t5/disk-enclosures/hot-spare-joining-array/m-p/2482643#M919 I have a ProLiant ML350 with a 431 Array controller. I currently have a RAID 5 with 3 active disks and a hot spare. I would like to add the hot spare to the active array. I am assuming that I can just load the on-line array utility and make the change, is this correct? Anyone done this and have some words of wisdom? Thanks in advance. Mon, 15 Jan 2001 00:00:00 GMT https://community.hpe.com/t5/disk-enclosures/hot-spare-joining-array/m-p/2482643#M919 Ayman Altounji 2001-01-15T00:00:00Z https://community.hpe.com/t5/disk-enclosures/hot-spare-joining-array/m-p/2482644#M920 Yes this is correct you can add this on the fly. Wed, 17 Jan 2001 00:00:00 GMT https://community.hpe.com/t5/disk-enclosures/hot-spare-joining-array/m-p/2482644#M920 Ayman Altounji 2001-01-17T00:00:00Z https://community.hpe.com/t5/disk-enclosures/hot-spare-joining-array/m-p/2482645#M921 Thanks for the Assistance mpett1 ..... Tue, 06 Feb 2001 00:00:00 GMT https://community.hpe.com/t5/disk-enclosures/hot-spare-joining-array/m-p/2482645#M921 Ayman Altounji 2001-02-06T00:00:00Z