https://community.hpe.com/t5/disk-enclosures/scsi-queue-for-disk-array-is-incorrectly-set-to-8/m-p/3044377#M9380 How would one go about fixing this error message? Where do you set this at?<BR /><BR /><BR />FYI - EMC Symetrix Disk Array is used.<BR /><BR />Your help is appreciated. Thx! Thu, 07 Aug 2003 18:20:41 GMT ASOEASTGEOGRAPHY 2003-08-07T18:20:41Z https://community.hpe.com/t5/disk-enclosures/scsi-queue-for-disk-array-is-incorrectly-set-to-8/m-p/3044377#M9380 How would one go about fixing this error message? Where do you set this at?<BR /><BR /><BR />FYI - EMC Symetrix Disk Array is used.<BR /><BR />Your help is appreciated. Thx! Thu, 07 Aug 2003 18:20:41 GMT https://community.hpe.com/t5/disk-enclosures/scsi-queue-for-disk-array-is-incorrectly-set-to-8/m-p/3044377#M9380 ASOEASTGEOGRAPHY 2003-08-07T18:20:41Z https://community.hpe.com/t5/disk-enclosures/scsi-queue-for-disk-array-is-incorrectly-set-to-8/m-p/3044378#M9381 Probably need a EMC rep:<BR /><BR /><A href="http://powerlink.emc.com" target="_blank">http://powerlink.emc.com</A> <BR /><BR />I believe this is the queue depth and I believe 8 is the default. 16 and 32 are not uncommon values. You probably have to change from 8 to one of these.<BR /><BR />Check with EMC. Thu, 07 Aug 2003 18:55:39 GMT https://community.hpe.com/t5/disk-enclosures/scsi-queue-for-disk-array-is-incorrectly-set-to-8/m-p/3044378#M9381 Michael Steele_2 2003-08-07T18:55:39Z