https://community.hpe.com/t5/disk-enclosures/compaq-5300-controller/m-p/3060170#M9585 You can do this without a problem. Just make sure that you run the system configuration utility from the F10 partition.<BR /><BR />Leon Mon, 01 Sep 2003 06:04:28 GMT Leon Rosier 2003-09-01T06:04:28Z https://community.hpe.com/t5/disk-enclosures/compaq-5300-controller/m-p/3060169#M9584 I was wondering if its possible to move a array controller from one PCI bus to another (a 64bit/33mhz to a 64/66mhz) without damaging the arrays on the controller.<BR /><BR />The system is a Compaq DL580 G1, running windows 2000 advanced server.<BR /><BR />Will there occur any problems doing the operation?<BR /><BR />Thanks<BR /><BR />Christian Sat, 30 Aug 2003 11:35:47 GMT https://community.hpe.com/t5/disk-enclosures/compaq-5300-controller/m-p/3060169#M9584 Christian Hansen 2003-08-30T11:35:47Z https://community.hpe.com/t5/disk-enclosures/compaq-5300-controller/m-p/3060170#M9585 You can do this without a problem. Just make sure that you run the system configuration utility from the F10 partition.<BR /><BR />Leon Mon, 01 Sep 2003 06:04:28 GMT https://community.hpe.com/t5/disk-enclosures/compaq-5300-controller/m-p/3060170#M9585 Leon Rosier 2003-09-01T06:04:28Z