https://community.hpe.com/t5/disk-enclosures/w2k-sp4-ra4100-cluster/m-p/3074719#M9745 Hi,<BR /><BR />As far as I know Secure Path 4 is not working wth RA4100.<BR />I had the same problem and what you need is Secure Path 3.1A Fri, 19 Sep 2003 14:07:53 GMT Lior_5 2003-09-19T14:07:53Z https://community.hpe.com/t5/disk-enclosures/w2k-sp4-ra4100-cluster/m-p/3074718#M9744 Hello , <BR />Got 2 W2k Sp4 ML570. Cluster config is OK and working file but Secure Path 4 (build 4.0.6.5) is not. Under secure path manager I can see both nodes but NOT the paths or LUNs ... Also, its clear that its NOT working properly . <BR />Each server has 2 HBA and if you take off the active one on the active cluster node, cluster fails and switch back to the other node . It seems that there is only one available path. <BR />Any clue ? Thu, 18 Sep 2003 19:55:10 GMT https://community.hpe.com/t5/disk-enclosures/w2k-sp4-ra4100-cluster/m-p/3074718#M9744 Rogerio Destito 2003-09-18T19:55:10Z https://community.hpe.com/t5/disk-enclosures/w2k-sp4-ra4100-cluster/m-p/3074719#M9745 Hi,<BR /><BR />As far as I know Secure Path 4 is not working wth RA4100.<BR />I had the same problem and what you need is Secure Path 3.1A Fri, 19 Sep 2003 14:07:53 GMT https://community.hpe.com/t5/disk-enclosures/w2k-sp4-ra4100-cluster/m-p/3074719#M9745 Lior_5 2003-09-19T14:07:53Z