topic Re: HP cd-writer 9100 series write errors in Optical Jukeboxes and Drives

HP cd-writer 9100 series write errors

CA773551 — Mon, 08 Apr 2002 00:55:48 GMT

I have run this cd-writer on a PIII system for several months with no problems. I recently acquired an AMD system consisting of an Athlon 1700+ processor on a Gigabyte GA-7DXR+ motherboard with DDR SDRAM. The cd-writer will not write a cd on this system. I get write errors every time I try to copy a cd. However, when I removed the cd-writer and reinstalled it in the PIII system, it wrote just fine onto a cd that I had gotten a write error on with the other system. Any ideas or suggestions?

Re: HP cd-writer 9100 series write errors

Mon, 08 Apr 2002 17:00:40 GMT

Hello Linda,

You may want to try updating all of your IDE drivers from the board manufacturer's web site.

Jeff

Re: HP cd-writer 9100 series write errors

Jaso_1 — Fri, 10 May 2002 14:29:18 GMT

But she could also set down the write speed when copying cd to cd. Also she could check if the dma is enabled on both cd-writer and her cd-rom. But if it still fails, she could actually make a iso file to the hdd and write from there.