topic Re: Continual CDR errors - every time in Optical Jukeboxes and Drives

Continual CDR errors - every time

Graham Williams_2 — Mon, 27 Jan 2014 06:12:42 GMT

Help please,

I have an internal 7200 CD writer installed, purchased it about 8 months ago.

Having rebuilt my system and installed it in this I am failing **every single**
Cd write with the error message,"T0100, I/O error, CD error, power calibration
area is full".... the what is full!!

I have not got an idea how to resolve this and have tried verious media makes
and get the same error every time.

If you can help, and don't want to snarl this forum up then please email me
direct... this is actually preferable as I have easier and more frequent access
to email than Web.

Thanks in advance.

Graham Williams

P.S. This thread has been moved from Storage > General to Optical Jukeboxes & drives. - Hp Forum Moderator

Re: Continual CDR errors - every time

Peter Mellen — Tue, 08 Aug 2000 08:43:09 GMT

Yes, I have the same problem! I've tried almost everything and searched the Web thoroughly.

Any luck fixing it?

Responses are welcome. Please send to pmellen@headlight.com.

Re: Continual CDR errors - every time

Devbinder Singh Marway — Wed, 09 Aug 2000 09:12:06 GMT

Could it be that you have a 'dodgy' CD Writer, if it is still under warranty get it replaced. The other thing , is what software are you using to burn your CD's. I have in the past had problems with easy cd creator, and now am using NERO .

regards
DEV

Re: Continual CDR errors - every time

Peter Mellen — Wed, 11 Oct 2000 04:35:58 GMT

Hi Folks,

I finally solved the problem! There is an obscure URL (http://www.stas.net/drwalk/) that explains the actual cause. It has something to do with the design of the drive, and it is a hardware issue. I called HP and they promptly sent me a replacement drive. Fortunately mine was still under warranty. I haven't had any problems since.

Good luck!

- Peter

Re: Continual CDR errors - every time

Peter Mellen — Thu, 12 Oct 2000 04:14:50 GMT

When I last posted the URL, I accidently included a closing parentheses. If you're having problems accessing the site, try:

http://www.stas.net/drwalk/

- Peter