9200e makes SCSI adapter freeze at boot

Gene_9 — Mon, 24 Feb 2014 02:05:45 GMT

The SCSI adapter (Adaptec AHA-2930CU) is in working order and boots fine. Until I plug in my external 9200 Series CDR. The system hangs at the SCSI card splash screen after reboot.

I've tried several SCSI id's for the CDR, 0, 6, etc. same effect.

SCSI card has a config utility which can be invoked from the same splash screen where the it hangs with CDR. There are some advanced options in the config utility.

any ideas?

P.S. This thread has been moevd from Disk to Optical Jukeboxes & Drives. - Hp Forum Moderator

Re: 9200e makes SCSI adapter freeze at boot

Helen French — Thu, 24 Jan 2002 18:21:32 GMT

Hi Gene,

Check whether u have properly terminated your external drive. Also check the cables and connectivity.

While the system works fine, open the utility and find out whether the external devices/connections are enabled. Also check for jumbers/switches which enables external devices.

HTH,
Shiju

topic 9200e makes SCSI adapter freeze at boot in Optical Jukeboxes and Drives

9200e makes SCSI adapter freeze at boot

Re: 9200e makes SCSI adapter freeze at boot