topic Re: Deleting data from disk in Optical Jukeboxes and Drives

Deleting data from disk

M J G — Mon, 26 May 2014 04:49:20 GMT

hiya,

I'd like some advise on totally deleting data on disks. I believe lvremove and vgremove or vgexport will only scramble the disk headers. I have confidential information I need deleting.

I have been advised to used mediainit on each disk and over write with a dd five times.

Any other ideas?

P.S. This thread has been moevd from Disk to HP-UX > sysadmin. - Hp Forum Moderator

Re: Deleting data from disk

Ricardo Rocha — Tue, 22 Oct 2002 15:25:10 GMT

hi

dd once should be enough...

Re: Deleting data from disk

Ken Hubnik_2 — Tue, 22 Oct 2002 18:21:09 GMT

dd if=/dev/null of=/dev/rdsk/cxtydz bs=1024k

Re: Deleting data from disk

Michael Tully — Tue, 22 Oct 2002 23:41:32 GMT

Hi,

If the disk is part of a volume group and you wish to remove the whole volume group, a simple 'vgexport /dev/myvolgrp' will be sufficient. If you choose to re-use the disk for another volume group, then you must use 'pvcreate -f' before you attempt to use the disk.
You can run a 'dd', but it not necessary.

Another method is by using this example 'vgreduce /dev/myvolgrp /dev/dsk/cxtydz to remove the disk from the volume group, if that is the only disk you wish to remove.

HTH
Michael

Re: Deleting data from disk

Keith Clark — Wed, 23 Oct 2002 11:51:03 GMT

Hi,

Sun has written a blueprint on datascrubbing in which they suggest overwriting the disk twice using the format command. The equivalent in HP is mediainit, so perhaps using it twice would be sufficient.

Here is a link to Sun's blueprint: http://www.sun.com/blueprints/0600/scrub.pdf

Keith