topic Re: Win 2k problem in Optical Jukeboxes and Drives

Win 2k problem

John Consiglio_1 — Mon, 23 Feb 2015 02:49:33 GMT

Since I have started using Win 2k I have not been able to write a CD properly. I have all the lastest software and firmware updates from HP's site and it seems to start the process fine and then stop about 4% into the burn cycle and I get a read error. I get a read error whether the source is another CD or a data file on the hard drive. Any suggestions?

P.S. This thread has been moved from General to Optical Jukeboxes & Drives. - Hp Forum moderator

Re: Win 2k problem

John Consiglio_1 — Fri, 05 Oct 2001 05:28:25 GMT

Sorry, should have included that it is a HP 7200i

Re: Win 2k problem

Dries Bertier — Sat, 06 Oct 2001 10:11:23 GMT

Hi,

Check cabling ! How is your drive connected, it should be on the secondary ide channel as slave. I also had the problem with a defective cdrom player on the same ide channel. Also try to unpower the cdrom reader to test.

Dries