topic Re: 1200ex positioning errors in Optical Jukeboxes and Drives

1200ex positioning errors

Mickey Souza — Sat, 19 Jun 2004 13:38:47 GMT

There is something strange going on with this jukebox. It is getting positioning errors so that the picker is not aligned correctly with the slot or drive. It jammed the disk so badly, it broke the picker. The error codes are 42h and various other errors calling the picker, media, tranlate, drive, etc...

Also, we are seeing many scsi bus errors.

We have changed the picker(s), translate and vertical motor assmblies, and upgraded the firmware.

Any suggestions?

Re: 1200ex positioning errors

Curtis Ballard — Mon, 21 Jun 2004 11:35:49 GMT

You probably have a damaged encoder strip.

Re: 1200ex positioning errors

Mickey Souza — Mon, 21 Jun 2004 11:40:08 GMT

We replaced the picker and the tranlate assembly and got it to run 10 good passes of wellness and the translate/mechanical exerciser. It fails only online.

Re: 1200ex positioning errors

Curtis Ballard — Mon, 21 Jun 2004 17:23:17 GMT

There shouldn't be anything different about operating online -vs- running a front panel test. The library has no concept of online and offline. If there is minor encoder damage maybe 10 loops just isn't enough for the problem to accumulate.

Can you pull a support ticket with Library and Tape Tools and post it here zipped? That should help.

You mention getting "many scsi bus errors". Any details on what you mean by that?