https://community.hpe.com/t5/optical-jukeboxes-and-drives/cdrecord-problem/m-p/3666266#M795 I'm trying to get the CD burner working on a RX2620 machine running HPUX 11iv2. cdrecord doesn't seems to work, and replies with a log that includes (what i think is the relevant part) <BR /><BR />cdrecord: I/O error. close track/session: scsi sendcmd: retryable error<BR />CDB: 5B 00 02 00 00 00 00 00 00 00<BR />status: 0x2 (CHECK CONDITION)<BR />Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 72 04 00 00 00 00<BR />Sense Key: 0x5 Illegal Request, Segment 0<BR />Sense Code: 0x72 Qual 0x04 (empty or partially written reserved track) Fru 0x0<BR />Sense flags: Blk 0 (not valid)<BR />cmd finished after 0.008s timeout 480s<BR />cmd finished after 0.008s timeout 480s<BR />cdrecord: Cannot fixate disk.<BR />Fixating time: 0.016s<BR />cdrecord: fifo had 86 puts and 23 gets.<BR />cdrecord: fifo was 0 times empty and 4 times full, min fill was 89%.<BR /><BR />the error seems to suggest a problem with the CDR, but after trying with a good handful of different CDRs, it seems unlikely the problem is there.<BR /><BR />My understanding of the whole CD burning process borders on non-existant, :-) so I'm at a loss as to what the problem could potentially be, and what i can do to figure out where the problem lies (could it still be bad CDRs, bad drive, problem with cdrecord, etc?), does anyone have any suggestions?<BR /><BR />if it helps, cdrecord was launched in TAO mode, tried a variety of write speeds and no other directives other than pointing it to the right drive. Mon, 07 Nov 2005 18:18:33 GMT Jim Li_1 2005-11-07T18:18:33Z https://community.hpe.com/t5/optical-jukeboxes-and-drives/cdrecord-problem/m-p/3666266#M795 I'm trying to get the CD burner working on a RX2620 machine running HPUX 11iv2. cdrecord doesn't seems to work, and replies with a log that includes (what i think is the relevant part) <BR /><BR />cdrecord: I/O error. close track/session: scsi sendcmd: retryable error<BR />CDB: 5B 00 02 00 00 00 00 00 00 00<BR />status: 0x2 (CHECK CONDITION)<BR />Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 72 04 00 00 00 00<BR />Sense Key: 0x5 Illegal Request, Segment 0<BR />Sense Code: 0x72 Qual 0x04 (empty or partially written reserved track) Fru 0x0<BR />Sense flags: Blk 0 (not valid)<BR />cmd finished after 0.008s timeout 480s<BR />cmd finished after 0.008s timeout 480s<BR />cdrecord: Cannot fixate disk.<BR />Fixating time: 0.016s<BR />cdrecord: fifo had 86 puts and 23 gets.<BR />cdrecord: fifo was 0 times empty and 4 times full, min fill was 89%.<BR /><BR />the error seems to suggest a problem with the CDR, but after trying with a good handful of different CDRs, it seems unlikely the problem is there.<BR /><BR />My understanding of the whole CD burning process borders on non-existant, :-) so I'm at a loss as to what the problem could potentially be, and what i can do to figure out where the problem lies (could it still be bad CDRs, bad drive, problem with cdrecord, etc?), does anyone have any suggestions?<BR /><BR />if it helps, cdrecord was launched in TAO mode, tried a variety of write speeds and no other directives other than pointing it to the right drive. Mon, 07 Nov 2005 18:18:33 GMT https://community.hpe.com/t5/optical-jukeboxes-and-drives/cdrecord-problem/m-p/3666266#M795 Jim Li_1 2005-11-07T18:18:33Z