https://community.hpe.com/t5/storeever-tape-storage/smartstart-ssl-error/m-p/3247835#M11458 The problem was a defect of the processor, better the FPU (Floating Point Unit). After replacing the processor, the smartstart worked probably. The FPU is used by smartstart for the ssl encryption and thats the reason why the error message appears. Fri, 10 Dec 2004 02:23:31 GMT Mathias Tschachtli 2004-12-10T02:23:31Z https://community.hpe.com/t5/storeever-tape-storage/smartstart-ssl-error/m-p/3247833#M11456 I want to start Smartstart on a Proliant ML530 Server and choose the diagnostic utilitys or array configuration a message like "YOU CANNOT CONNECT TO 127.0.0.1 BECAUSE OF AN UNKNOWN SSL ERROR (-12272)" appears. Does anyone knows what this message means? Wed, 14 Apr 2004 09:23:08 GMT https://community.hpe.com/t5/storeever-tape-storage/smartstart-ssl-error/m-p/3247833#M11456 Mathias Tschachtli 2004-04-14T09:23:08Z https://community.hpe.com/t5/storeever-tape-storage/smartstart-ssl-error/m-p/3247834#M11457 I have also received this message. Did you find an answer to this error? Thu, 09 Dec 2004 16:17:52 GMT https://community.hpe.com/t5/storeever-tape-storage/smartstart-ssl-error/m-p/3247834#M11457 Colette Fuhrman 2004-12-09T16:17:52Z https://community.hpe.com/t5/storeever-tape-storage/smartstart-ssl-error/m-p/3247835#M11458 The problem was a defect of the processor, better the FPU (Floating Point Unit). After replacing the processor, the smartstart worked probably. The FPU is used by smartstart for the ssl encryption and thats the reason why the error message appears. Fri, 10 Dec 2004 02:23:31 GMT https://community.hpe.com/t5/storeever-tape-storage/smartstart-ssl-error/m-p/3247835#M11458 Mathias Tschachtli 2004-12-10T02:23:31Z