https://community.hpe.com/t5/storeever-tape-storage/448-wrong-capacity/m-p/5036664#M28945 Everything clarified.<BR />The client uses tapes of less capacity reason why the result is correct.<BR /><BR />Thanks. Wed, 28 Mar 2007 08:46:11 GMT Albert Malvehy 2007-03-28T08:46:11Z https://community.hpe.com/t5/storeever-tape-storage/448-wrong-capacity/m-p/5036663#M28944 I have a Autoloader 1/8 + ULTRIUM 448 (LTO2) managed by a HP OV DP5.5 behind a W2003. The data cartridges that I use are the C7972A of 400GB with compression.<BR />I have a problem with the space available in tapes since from 150GB it indicates to me that the tape is full, when I must find a capacity over 200GB + the compression by hardware. Watching the report from “Support Tickets from Device” indicates to me that the “Data compression is enabled” and from software (OV DP5.5) is not activated the compression by software. When format the tapes, I do it by its capacity without compression as it indicates by the HP manual of OVDP (2048000 MB).<BR />¿Somebody knows as I can solve this problem of capacity of tapes?<BR /><BR />Thanks a lot. Tue, 27 Mar 2007 09:32:32 GMT https://community.hpe.com/t5/storeever-tape-storage/448-wrong-capacity/m-p/5036663#M28944 Albert Malvehy 2007-03-27T09:32:32Z https://community.hpe.com/t5/storeever-tape-storage/448-wrong-capacity/m-p/5036664#M28945 Everything clarified.<BR />The client uses tapes of less capacity reason why the result is correct.<BR /><BR />Thanks. Wed, 28 Mar 2007 08:46:11 GMT https://community.hpe.com/t5/storeever-tape-storage/448-wrong-capacity/m-p/5036664#M28945 Albert Malvehy 2007-03-28T08:46:11Z