Netbackup error

Joelmel Roche — Wed, 12 Dec 2007 07:02:37 GMT

need help about this error in hpux syslog

Dec 10 09:40:52 CBSHP02 ltid[3486]: Operator has UP'ed drive QUANTUMDLT80000 (device 1)
Dec 10 09:42:44 CBSHP02 tldcd[11174]: TLD(0) key = 0x4, asc = 0x40, ascq = 0x80, DIAGNOSTIC FAILURE ON COMPONENT ASCQ (80H-FFH)
Dec 10 09:42:44 CBSHP02 tldcd[11174]: TLD(0) drive read_element_status error
Dec 10 09:42:44 CBSHP02 tldd[3541]: TLD(0) going to DOWN state, status: Unable to sense robotic device
Dec 10 09:44:49 CBSHP02 tldd[3541]: TLD(0) going to UP state
Dec 10 09:45:58 CBSHP02 vmd[3494]: terminating - successful (0)
Dec 10 09:45:58 CBSHP02 ltid[3486]: Sending shutdown to tldcd daemon...
Dec 10 09:45:58 CBSHP02 tldcd[3549]: TERMINATION requested from CBSHP02
Dec 10 09:46:01 CBSHP02 tldcd[3549]: Daemon has terminated on request
Dec 10 09:46:40 CBSHP02 tldd[11514]: Error in Semaphore Operation - Invalid argument
Dec 10 09:46:40 CBSHP02 tldd[11514]: Daemon has terminated abnormally
Dec 10 09:46:40 CBSHP02 tldd[11514]: Daemon has terminated due to IPC message failure

Re: Netbackup error

Rob Leadbeater — Wed, 12 Dec 2007 08:33:31 GMT

Hi,

I'd guess that there's some sort of fault in whatever library the DLT drive is in.

However a little bit more background information would be useful... Are you having any problems, other than seeing the error in the log ?

Cheers,

Rob

Re: Netbackup error

Joelmel Roche — Thu, 13 Dec 2007 02:18:36 GMT

thanks,
solve problem in netbackup configuration, no hardware problem

Re: Netbackup error

Joelmel Roche — Thu, 13 Dec 2007 02:20:26 GMT

closed

topic Re: Netbackup error in StoreEver Tape Storage

Netbackup error

Re: Netbackup error

Re: Netbackup error

Re: Netbackup error