topic Re: 1/8 G2 Autoloader drive load timeout code f4 98 in StoreEver Tape Storage

1/8 G2 Autoloader drive load timeout code f4 98

locaoimh — Tue, 13 Sep 2011 09:39:26 GMT

Hi,

I am getting an error flashing on the front of the drive. I have dismounted the drives and remounted. For each tape in the drive I get

11.09.12 15:34:36.59 Library Error - HE: drive load timeout

Return status: 0x80 - command failed

Global error code: 0xF4 - hardware error, drive load timeout

Module error code: 0x98, 152

Current command: 0x15 - move cartridge

Task originator: 0x02 - CDB interpreter task

Extender library specifier: 0x00, 0

Source element type.: 0x02 - storage slot

Element number: 0x07, 7

Destination element type.: 0x04 - tape drive

Element number: 0x01, 1
This message was generated automatically from

1/8 G2 Autoldr

Serial Number : xxxxxxxxxxxx

IP Address : http://x.x.x.x.

Firmware Revision : 2.60

Library Name : FLXCCE43D

I have restarted, ran the wellness test, nothing works.

What do I need to do. I can't find any specific details on this error, like what caused it and what the resolution is.

Thanks in advance.

Re: 1/8 G2 Autoloader drive load timeout code f4 98

Eric_de_Lange — Tue, 13 Sep 2011 10:06:17 GMT

Here is what I found:

F4 - Time allotted for drive loading exceeded

Recommended actions:

Check that the tape cartridge is supported and has not exceeded its usage life. Inspect it for damage.

Retry the operation.

Clean the drive.

You described that the issue happens with all tapes in the loader ? Are they new, used ? Have they been working ?

You best next action would be to generate an L&TT support ticket and submit that to HP Support for review.

-Eric

Re: 1/8 G2 Autoloader drive load timeout code f4 98

locaoimh — Tue, 13 Sep 2011 11:17:07 GMT

Yes it fails with all tapes. If I leave all slots empty the error indicator stops (after a restart).

I have put in a new, blank tape and I get the error again.

Re: 1/8 G2 Autoloader drive load timeout code f4 98

geiar99 — Tue, 23 Oct 2012 09:56:26 GMT

Hi,

I have exactly the ssame rpoblem since they've changed the tape library with a brand new one.

It's a MSL8096.

Could you please tell me how you fixed it (if you were able).

Thanks a lot!

Re: 1/8 G2 Autoloader drive load timeout code f4 98

Rajanikant — Sat, 05 Jan 2013 05:04:28 GMT

@geiar99 wrote:
Hi,

I have exactly the ssame rpoblem since they've changed the tape library with a brand new one.
It's a MSL8096.

Could you please tell me how you fixed it (if you were able).

Thanks a lot!

Hi,

If the FC connection of the drives are running at 8GBps, it is recommended to change them to 4GBps and check.

Did you fix this issue? Will be helpful if you can share the solution