https://community.hpe.com/t5/storeever-tape-storage/ml6060-cannot-lock-drive-error/m-p/416876#M43560 when using this library backup exec sees the robotics and the drives ok but if you try and run a backup then the arm put a tape in the slot fails to lock drive and freezes it before moving thru the entire library doing the same. running w2k server on a san Thu, 19 Aug 2004 10:07:26 GMT BR822361 2004-08-19T10:07:26Z https://community.hpe.com/t5/storeever-tape-storage/ml6060-cannot-lock-drive-error/m-p/416876#M43560 when using this library backup exec sees the robotics and the drives ok but if you try and run a backup then the arm put a tape in the slot fails to lock drive and freezes it before moving thru the entire library doing the same. running w2k server on a san Thu, 19 Aug 2004 10:07:26 GMT https://community.hpe.com/t5/storeever-tape-storage/ml6060-cannot-lock-drive-error/m-p/416876#M43560 BR822361 2004-08-19T10:07:26Z https://community.hpe.com/t5/storeever-tape-storage/ml6060-cannot-lock-drive-error/m-p/416877#M43561 if you are using the library ove a SAN, you should take care that just one host manage the library at a time, if you have more than one server with a Backup application you will run in trouble/ You can have the same Backup SW, but need a special SAN module.<BR />Be also sure that you have no supervisoring software that will poll the library, and also for all the Windows servers, you nust disable the RMS<BR /><BR />marino Fri, 20 Aug 2004 09:07:38 GMT https://community.hpe.com/t5/storeever-tape-storage/ml6060-cannot-lock-drive-error/m-p/416877#M43561 meloni 2004-08-20T09:07:38Z