https://community.hpe.com/t5/storeever-tape-storage/4-8gb-4mm-dat-jumper-and-switch-settings/m-p/2478112#M455 Hello, <BR /> <BR />I have looked all over the Compaq support site and can't find any documents that show jumper settings for SCSI ID or Switch block settings <BR />for my tape drive Part# C1539-20485 P/N:242896-001. I would appreciate a pointer to this information for my installation. <BR /> <BR />Thanks, <BR /> Greg. Wed, 03 Jan 2001 00:00:00 GMT Ayman Altounji 2001-01-03T00:00:00Z https://community.hpe.com/t5/storeever-tape-storage/4-8gb-4mm-dat-jumper-and-switch-settings/m-p/2478112#M455 Hello, <BR /> <BR />I have looked all over the Compaq support site and can't find any documents that show jumper settings for SCSI ID or Switch block settings <BR />for my tape drive Part# C1539-20485 P/N:242896-001. I would appreciate a pointer to this information for my installation. <BR /> <BR />Thanks, <BR /> Greg. Wed, 03 Jan 2001 00:00:00 GMT https://community.hpe.com/t5/storeever-tape-storage/4-8gb-4mm-dat-jumper-and-switch-settings/m-p/2478112#M455 Ayman Altounji 2001-01-03T00:00:00Z https://community.hpe.com/t5/storeever-tape-storage/4-8gb-4mm-dat-jumper-and-switch-settings/m-p/2478113#M456 The DAT drive supplemental manual goes over most of these. The C1536 and 1539 are basically the same:<BR /><BR /><A href="http://www.compaq.com/support/techpubs/user_reference_guides/340625-002.html" target="_blank">DAT Drive Supplemental Manual</A> Thu, 04 Jan 2001 00:00:00 GMT https://community.hpe.com/t5/storeever-tape-storage/4-8gb-4mm-dat-jumper-and-switch-settings/m-p/2478113#M456 Ayman Altounji 2001-01-04T00:00:00Z