https://community.hpe.com/t5/storeever-tape-storage/backup-failed/m-p/722066#M49176 We have a MSL5026S2 tape storage device. When the backup process is starting, everything works properly until the moment there's a tape change. The format of tape 2 is finished and after this we got a scsi error. We cannot reach the device, not by http adress or rs232 port. The front display works properly and no error messages appears. When i switch off the device and then power on again, the device is working again, but the same error occurs when i start the backup again. Tue, 28 Nov 2006 06:16:19 GMT Martin Panhuis 2006-11-28T06:16:19Z https://community.hpe.com/t5/storeever-tape-storage/backup-failed/m-p/722066#M49176 We have a MSL5026S2 tape storage device. When the backup process is starting, everything works properly until the moment there's a tape change. The format of tape 2 is finished and after this we got a scsi error. We cannot reach the device, not by http adress or rs232 port. The front display works properly and no error messages appears. When i switch off the device and then power on again, the device is working again, but the same error occurs when i start the backup again. Tue, 28 Nov 2006 06:16:19 GMT https://community.hpe.com/t5/storeever-tape-storage/backup-failed/m-p/722066#M49176 Martin Panhuis 2006-11-28T06:16:19Z https://community.hpe.com/t5/storeever-tape-storage/backup-failed/m-p/722067#M49177 latest firmware applied?? Tue, 05 Dec 2006 13:27:44 GMT https://community.hpe.com/t5/storeever-tape-storage/backup-failed/m-p/722067#M49177 Duncan Boucher 2006-12-05T13:27:44Z https://community.hpe.com/t5/storeever-tape-storage/backup-failed/m-p/722068#M49178 We replaced the glass fiber interface card in the MSL, the backup is working again!<BR />So, it lookes like a hardware problem! Wed, 06 Dec 2006 04:20:53 GMT https://community.hpe.com/t5/storeever-tape-storage/backup-failed/m-p/722068#M49178 Martin Panhuis 2006-12-06T04:20:53Z