https://community.hpe.com/t5/hpe-storeever-tape-storage/libctrl-task-error/m-p/7122921#M56876 <P>Hi,</P><P>it seems, that something block the Gripper/Sled inside.</P><P>Remove the Magazine take a lamp and look if there is a mechanical block.</P><P>Most Time a Tape fall Inside.</P><P>Cali</P> Fri, 26 Feb 2021 11:33:36 GMT Cali 2021-02-26T11:33:36Z https://community.hpe.com/t5/hpe-storeever-tape-storage/libctrl-task-error/m-p/7122740#M56875 <P>Hi there,</P><P>I've just found these error on the MSL G3 Series, Currently Installed Library Firmware 7.10 / 3.20e</P><P>0001 19.09.29 04:08:56.09 Libctrl task Error - HE: sled blocked<BR />Return status: 0x80 - command failed<BR />Global error code: 0x8D - HE: sled blocked<BR />Robotic movement error: 0x14 - error during sled move -&gt; check shipping lock<BR />Task originator: 0x00 - Libctrl task<BR />Extender library specifier: 0x00 - master library</P> Thu, 25 Feb 2021 08:12:41 GMT https://community.hpe.com/t5/hpe-storeever-tape-storage/libctrl-task-error/m-p/7122740#M56875 erfersi 2021-02-25T08:12:41Z https://community.hpe.com/t5/hpe-storeever-tape-storage/libctrl-task-error/m-p/7122921#M56876 <P>Hi,</P><P>it seems, that something block the Gripper/Sled inside.</P><P>Remove the Magazine take a lamp and look if there is a mechanical block.</P><P>Most Time a Tape fall Inside.</P><P>Cali</P> Fri, 26 Feb 2021 11:33:36 GMT https://community.hpe.com/t5/hpe-storeever-tape-storage/libctrl-task-error/m-p/7122921#M56876 Cali 2021-02-26T11:33:36Z