topic Re: More infomation on " SCSI controller not starting for DLT drive" in StoreEver Tape Storage

More infomation on " SCSI controller not starting for DLT drive"

Ayman Altounji — Wed, 24 Jan 2001 00:00:00 GMT

I download sp10754.
Then fallowed the steps below.

1. Start/setting/control panel
2. Tape device
3. Add/Have disk ........selected the path were the files are located.
4. rebooted the machine.

Once the server has been restarted and I logon to the server I recieved a message that a service has failed to start. The following is from Event viewer:
The following boot-start or system-start driver(s) failed to load:
cdlt7n4i

I'm very frustrated ....can anyone help!

Re: More infomation on " SCSI controller not starting for DLT drive"

Ayman Altounji — Wed, 07 Feb 2001 00:00:00 GMT

What specific DLT drive do you have?

Re: More infomation on " SCSI controller not starting for DLT drive"

Ayman Altounji — Wed, 07 Feb 2001 00:00:01 GMT

The DLT drive is a 35/70 and its attached to a dl380 and I also have another server 1850r that is using the same type of DLT drive expiencing the same problem.

Re: More infomation on " SCSI controller not starting for DLT drive"

Ayman Altounji — Thu, 08 Feb 2001 00:00:00 GMT

I had same problem. Fix was to uninstall the compaq scsi drivers (cpq32fs2), uninstall tape driver, then reinstall in the reverse order, ie tape driver then compaq scsi driver.

Re: More infomation on " SCSI controller not starting for DLT drive"

Ayman Altounji — Thu, 08 Feb 2001 00:00:01 GMT

Thanks for the bit of info but I have a question for you? Was that fix on a DL380 system or a 1850r system. The reason for the ? There are different motherboard architectures. A fix may work on one type of system but not on the other? Can you give me more info?

Re: More infomation on " SCSI controller not starting for DLT drive"

Ayman Altounji — Thu, 08 Feb 2001 00:00:00 GMT

That fix was for the 1850R and it is attached to a TL891 Library. Good Luck!