topic SDLT tape drive density code problem. in StoreEver Tape Storage

SDLT tape drive density code problem.

Matt Robbins — Mon, 24 Mar 2003 15:24:36 GMT

After restoring a file using a DLT IV tape on an SDLT tape drive, the density code now shows as DLT even if an SDLT tape is in the drive. This is also affecting any restores done using an SDLT since. It will only read up to 40gb and then asks for sequence 2. How do I change the density code to read SDLT?

Re: SDLT tape drive density code problem.

Glenn Weavind_1 — Wed, 26 Mar 2003 20:13:14 GMT

Matt: I've seen some problems with SDLT drives and DLTIV media: have you ensured that you have the latest firmware in your SDLT drive?
Does the capacity setting persist if you power down the server and SDLT drive?

Re: SDLT tape drive density code problem.

Naeem Khokhar — Tue, 01 Apr 2003 21:42:48 GMT

try these patches

HP patches:
PHKL_28216 for 11.0
PHKL_28217 for 11i

OR

1- ioscan -f (get instance number for your tape drive, in my case it was 0
[zero])

2- mksf -d stape -I -b -c

mksf -d stape -I 0 -b 147 -c 16

This will create a "devices node" ; in our case it was
c0t14d0D147C16

3- tar -cvf /dev/rmt/c0t14d0D147C16 /usr

Note: This is a rewind device node