https://community.hpe.com/t5/storeever-tape-storage/testing-tools/m-p/3053202#M8477 Hi,<BR /><BR />Is there a tool that can be used to test the 12/24 DAT drive in an older Proliant 1600 running Netware 5? <BR /><BR />When I start BackupExec, I am getting an error stating that the drive could not be mounted. How can I test to verify if the problem is the drive or the SCSI controller?<BR /><BR />Thanks. Wed, 20 Aug 2003 19:16:27 GMT Blaine Pullin 2003-08-20T19:16:27Z https://community.hpe.com/t5/storeever-tape-storage/testing-tools/m-p/3053202#M8477 Hi,<BR /><BR />Is there a tool that can be used to test the 12/24 DAT drive in an older Proliant 1600 running Netware 5? <BR /><BR />When I start BackupExec, I am getting an error stating that the drive could not be mounted. How can I test to verify if the problem is the drive or the SCSI controller?<BR /><BR />Thanks. Wed, 20 Aug 2003 19:16:27 GMT https://community.hpe.com/t5/storeever-tape-storage/testing-tools/m-p/3053202#M8477 Blaine Pullin 2003-08-20T19:16:27Z https://community.hpe.com/t5/storeever-tape-storage/testing-tools/m-p/3053203#M8478 If you have the F10 partition installed including diagnostics, run diagnostics, choose scsi contr and here you can do a tapedrive test. You can also download the diagnostics diskettes. LTT is also available for Netware.<BR /><BR />Goos luck<BR /><BR />Leon Wed, 20 Aug 2003 20:40:35 GMT https://community.hpe.com/t5/storeever-tape-storage/testing-tools/m-p/3053203#M8478 Leon Rosier 2003-08-20T20:40:35Z