https://community.hpe.com/t5/general/lun-security-problem-with-hds-9200/m-p/2945535#M1728 Hello all,<BR />I have a problem with a HP-UX 11i host in a SAN connected through a Brocade 3800. On this particular switch there are two hosts/ We'll call HOST_A and HOST_B. The problem is that when I turn on LUN security I am unable to see any LUNS on either host. I have verified that the WWNN's are correct within the LUN security panle on the HDS. I run ioscan -fnCdisk and only the internal disks show up.<BR />I can see both hosts logging in to the Brocade as F-Ports. The HBA is a A5158A. There are link lights on all ports. If I turn off LUN security I can see all LUNS. I have LUN 0 defined to both hosts which I know is not a requirement any longer. They have all of the patches that address this issue anyway.<BR />I am awaiting the fcmsutil output for the server but am sure this will show fabric as that is what the switch is showing.<BR />Any suggestions would be appreciated.<BR /> Mon, 07 Apr 2003 23:19:41 GMT Keith C. Patterson 2003-04-07T23:19:41Z https://community.hpe.com/t5/general/lun-security-problem-with-hds-9200/m-p/2945535#M1728 Hello all,<BR />I have a problem with a HP-UX 11i host in a SAN connected through a Brocade 3800. On this particular switch there are two hosts/ We'll call HOST_A and HOST_B. The problem is that when I turn on LUN security I am unable to see any LUNS on either host. I have verified that the WWNN's are correct within the LUN security panle on the HDS. I run ioscan -fnCdisk and only the internal disks show up.<BR />I can see both hosts logging in to the Brocade as F-Ports. The HBA is a A5158A. There are link lights on all ports. If I turn off LUN security I can see all LUNS. I have LUN 0 defined to both hosts which I know is not a requirement any longer. They have all of the patches that address this issue anyway.<BR />I am awaiting the fcmsutil output for the server but am sure this will show fabric as that is what the switch is showing.<BR />Any suggestions would be appreciated.<BR /> Mon, 07 Apr 2003 23:19:41 GMT https://community.hpe.com/t5/general/lun-security-problem-with-hds-9200/m-p/2945535#M1728 Keith C. Patterson 2003-04-07T23:19:41Z