Command View SDM 1.07

Keith Bevan_1 — Wed, 03 Dec 2003 11:08:25 GMT

I intend on installing command view 1.07 onan rp54xx server running HP/UX 11i B.11.11 in the next few days.

First,I have a couple of questions for the forum :-

Can command view be uninstalled/installed whilst a VA7100 disk array & associated HP rp54xx server are in use ?

What patches are required by this install PHCO_29109 or PHCO_27632 or other?

If you have previously installed Commandview SDM 1.07 please let me know you experiences, troubles and success.

Thanks

Keith

Re: Command View SDM 1.07

Sandeep Mangla_2 — Wed, 03 Dec 2003 14:38:09 GMT

Yes, you can upgrade CV SDM without interrupting access to the VA.

I installed Command View SDM 1.07 on a couple of rp5470 boxes running 11.00 and connected to a VA-7410 array, without any problems.

a) Remove 1.06 with

swremove CMDVIEWSDM HPOVSAMHA HPOVSAMJR

b) Install docs say PHCO_29108 is a prerequisite but PHCO_29108 has a Critical warning and HP recommends reverting to PHCO_26960 instead.

c) swinstall -s /tmp/cvsdm_11_00_v10700.depot CMDVIEWSDM

d) Check swagent.log to verify armdiscover succeeded, if not - run manually.

e)Verify /etc/opt/sanmgr/hostagent/config/commIpAddr.txt has primary IP address (to which hostname is bound)

f) Create user(s) [at least one must be in the Administrator group] authorized to run arm* commands

secadmin -host

(Username is "Administrator", password is "administrator")

g) Verify by running armdsp -a a (as the user authorized in previous step).

h) Restore existing access.dat & ContactInfo.txt & merge older and new versions of PanConfigParams.txt

i) Ensure WEBSERVER_ENABLED=false in PanConfigParams.txt (if Web access to Comnand View GUI is not allowed).

topic Re: Command View SDM 1.07 in General

Command View SDM 1.07

Re: Command View SDM 1.07