https://community.hpe.com/t5/general/hp28696a-wide-scsi-controller-options/m-p/2421666#M202 To make a long story short: No<BR /><BR />The trouble is that the G50 has an internal HP-PB bus. All of the newer boxes <BR />use an other bus system (HSC, PCI...) And this is the reason way the current <BR />products are designed to run on buses different to the HP-PB<BR />28696A is the only FW SCSI interface for the HP-PB bus Tue, 18 Apr 2000 23:49:50 GMT Patrick Wessel_1 2000-04-18T23:49:50Z https://community.hpe.com/t5/general/hp28696a-wide-scsi-controller-options/m-p/2421665#M201 Has anyone found a replacement for the HP28696A controller now that it isn't <BR />covered under maintenance? I know it still is supported under T&amp;M but I prefer <BR />everything be covered with responce time limits etc...<BR /><BR />Running HP H50 at 10.20.<BR /><BR />Mike Mon, 17 Apr 2000 09:46:17 GMT https://community.hpe.com/t5/general/hp28696a-wide-scsi-controller-options/m-p/2421665#M201 Mike Sullivan_13 2000-04-17T09:46:17Z https://community.hpe.com/t5/general/hp28696a-wide-scsi-controller-options/m-p/2421666#M202 To make a long story short: No<BR /><BR />The trouble is that the G50 has an internal HP-PB bus. All of the newer boxes <BR />use an other bus system (HSC, PCI...) And this is the reason way the current <BR />products are designed to run on buses different to the HP-PB<BR />28696A is the only FW SCSI interface for the HP-PB bus Tue, 18 Apr 2000 23:49:50 GMT https://community.hpe.com/t5/general/hp28696a-wide-scsi-controller-options/m-p/2421666#M202 Patrick Wessel_1 2000-04-18T23:49:50Z