https://community.hpe.com/t5/general/tachyon-hba-and-brocade-s-quickloop/m-p/2455024#M368 Well you can have only one QL per switch (or max 2 switches) so it limits the number of servers you can connect per 2 switches. NT hosts with this card can login as Fabric aware so they do not need to be part of the QL. If you need private to public cummunication a lot (with some HP9k systems) you might be a bit limited.<BR /><BR />Cal. Thu, 30 Nov 2000 08:16:39 GMT Eric de Lange_2 2000-11-30T08:16:39Z https://community.hpe.com/t5/general/tachyon-hba-and-brocade-s-quickloop/m-p/2455023#M367 The "HP Fibre Channel Tachyon TL Fabric Migration Guide" states: The maximum number of Tachyon TL hosts supported on an FL_Port is eight" What implications does this have in a Brocade QL environment? Wed, 18 Oct 2000 12:45:57 GMT https://community.hpe.com/t5/general/tachyon-hba-and-brocade-s-quickloop/m-p/2455023#M367 Rodger Devillier 2000-10-18T12:45:57Z https://community.hpe.com/t5/general/tachyon-hba-and-brocade-s-quickloop/m-p/2455024#M368 Well you can have only one QL per switch (or max 2 switches) so it limits the number of servers you can connect per 2 switches. NT hosts with this card can login as Fabric aware so they do not need to be part of the QL. If you need private to public cummunication a lot (with some HP9k systems) you might be a bit limited.<BR /><BR />Cal. Thu, 30 Nov 2000 08:16:39 GMT https://community.hpe.com/t5/general/tachyon-hba-and-brocade-s-quickloop/m-p/2455024#M368 Eric de Lange_2 2000-11-30T08:16:39Z