topic Re: Command View SDM on Redhat AS 2.1 in General

Command View SDM on Redhat AS 2.1

Deyna Chia_2 — Mon, 23 Feb 2004 23:51:19 GMT

Hi,

I'm having problems with command view sdm 1.07 installed on redhat AS 2.1 (kernel 2.4.9). Error message "java.lang.NullPointerException" appeared after issuing some of the command view commands. However, armdsp -i works fine.

Thanks for any help.
Deyna Chia

Re: Command View SDM on Redhat AS 2.1

Sijesh — Tue, 09 Mar 2004 15:38:12 GMT

Hi Deyna,

When I install Commandview on my Windows systems it askes for installing Java pug-in.

My HP-UX system also have Java plug-ins installed.
Check for java package installation in your system.

Sijesh

Re: Command View SDM on Redhat AS 2.1

Tecnico HP — Fri, 12 Mar 2004 05:58:44 GMT

Hi, I have the same problem and on my system there is java 1.4.2. Any ideas?

thanks

Re: Command View SDM on Redhat AS 2.1

Deyna Chia_2 — Sun, 14 Mar 2004 04:20:19 GMT

Hi All,

I've got this solution from HP's GSE team. You need to edit the file /usr/src/linux-2.4.9-e.27/drivers/scsi/scsi.h

Change the following line from 12 to 16 -

#define MAX_COMMAND_SIZE 16

Then recompile the kernel. This will enable the midlayer drivers to hand 16 Byte CDB up to the higher layers.

Regards,
Deyna

Re: Command View SDM on Redhat AS 2.1

Deyna Chia_2 — Wed, 13 Sep 2006 21:07:21 GMT

I've got this solution from HP's GSE team. You need to edit the file /usr/src/linux-2.4.9-e.27/drivers/scsi/scsi.h

Change the following line from 12 to 16 -

#define MAX_COMMAND_SIZE 16

Then recompile the kernel. This will enable the midlayer drivers to handle 16 Byte CDB up to the higher layers.