https://community.hpe.com/t5/general/problem-error-upgrading-dcx-director-from-os-6-4-2a-to-7-0-1a/m-p/5782489#M5885 <P>The v701a upgrade fails immediately and states:</P><P>Upgrade is not allowed because the threshold configuration changed alarm is set for class env,&nbsp;&nbsp;&nbsp; area PS onFID 128.</P><P>Similar configuration may exist for other classes and areas and on other FIDS. Please use 'fw configure"...to unset the same...</P><P>&nbsp;</P><P>Fabric Watch is install but has never really been configured...ie thresholds,&nbsp;triggers emails etc.&nbsp;</P><P>This switch only has 1 x 32 pt blade installed.</P><P>No host connected at this time</P><P>2 ISLs setup for Fabric connection.</P><P>thats about the sum of it.&nbsp;&nbsp;</P><P>Anyone know how to get past this?&nbsp;&nbsp;</P> Tue, 28 Aug 2012 20:36:26 GMT muellj 2012-08-28T20:36:26Z https://community.hpe.com/t5/general/problem-error-upgrading-dcx-director-from-os-6-4-2a-to-7-0-1a/m-p/5782489#M5885 <P>The v701a upgrade fails immediately and states:</P><P>Upgrade is not allowed because the threshold configuration changed alarm is set for class env,&nbsp;&nbsp;&nbsp; area PS onFID 128.</P><P>Similar configuration may exist for other classes and areas and on other FIDS. Please use 'fw configure"...to unset the same...</P><P>&nbsp;</P><P>Fabric Watch is install but has never really been configured...ie thresholds,&nbsp;triggers emails etc.&nbsp;</P><P>This switch only has 1 x 32 pt blade installed.</P><P>No host connected at this time</P><P>2 ISLs setup for Fabric connection.</P><P>thats about the sum of it.&nbsp;&nbsp;</P><P>Anyone know how to get past this?&nbsp;&nbsp;</P> Tue, 28 Aug 2012 20:36:26 GMT https://community.hpe.com/t5/general/problem-error-upgrading-dcx-director-from-os-6-4-2a-to-7-0-1a/m-p/5782489#M5885 muellj 2012-08-28T20:36:26Z