topic Re: Rackmounting Question in Servers - General

Rackmounting Question

Kevin_88 — Tue, 25 Jun 2002 00:13:30 GMT

I've got an HP C2785A Rack with the U-shaped rails (actually, they're shaped more like a british pound sign - photo attached). I'm planning to buy some generic ATX rackmount computer cases but I don't know what I need in the way of inner rails to slide into the rails that are bolted to my posts. I guess I could just slide a box onto the little shelves sticking out from the bottoms of the rails but I'd rather have something that slides out like a drawer. Any ideas?

Re: Rackmounting Question

Tom Geudens — Wed, 26 Jun 2002 03:41:22 GMT

Hi,
I believe you are looking for a "sliding shelf". You can get those from HP. I believe (check this !!!) its PN J1526A.

Hope this helps,
Tom

Re: Rackmounting Question

Nick Wickens — Thu, 27 Jun 2002 09:40:15 GMT

We recently dropped some HP rackmounted servers into the same style cabinet and managed it by mounting the side brackets upside down. Doesn't slide out though .

Re: Rackmounting Question

Leif Halvarsson_2 — Thu, 27 Jun 2002 10:09:18 GMT

Hi
This can be a problem. I have the same rack as you. This rack is 19 inch between the vertical profiles and if you want to mount a 19 inch wide box you need to do as Nick. A sliding rail should be very difficult to use. In my case I have "home made" a special rail and mount it on the outer side of the vertical profiles.

Re: Rackmounting Question

Kevin_88 — Sat, 29 Jun 2002 02:09:32 GMT

Thanks for the help.