topic Re: hplog -t doesn't show Ambient temperature in Servers - General

hplog -t doesn't show Ambient temperature

tunsf000 — Wed, 10 Jun 2020 10:50:02 GMT

Dears,

I have a problem displaying Ambient temperature using hplog -t command: the output is empty: ---F/---C ---F/---C

root@manhdp11 # hplog -t
ID TYPE LOCATION STATUS CURRENT THRESHOLD
1 Basic Sensor Ambient Normal ---F/---C ---F/---C
2 Basic Sensor Processor Zone Normal 104F/ 40C 158F/ 70C
3 Basic Sensor Processor Zone Normal 104F/ 40C 158F/ 70C

Re: hplog -t doesn't show Ambient temperature

ksram — Thu, 11 Jun 2020 16:33:06 GMT

Hi @tunsf000 ,

Try updating the ILO Firmware, Driver, along with System Health Application and Insight Management Agents, and then restart the Server and check the commands.

Share the Server Model and Operating System, so that we can check and share the relevant links if available.

Thank you

Re: hplog -t doesn't show Ambient temperature

ksram — Mon, 29 Jun 2020 04:23:56 GMT

Hi @tunsf000 ,

Any update on this.

May I know if that worked

Thank you