topic N Class Terminal in Servers - General

N Class Terminal

Calin Maniu — Tue, 15 Oct 2002 08:07:43 GMT

I have been asked to administer an N class server, but it had no manual available. I have hooked up a HP terminal, model 700/96 and have tried with vt100 and vt220 and HP terminal emulation but I am not getting any response. I don't really know a lot about the N class or terminal settings.....Can anyone help?? what is the local consle port expecting?

Many thanks in advance,

Sam

Re: N Class Terminal

Vincent Farrugia — Tue, 15 Oct 2002 09:00:10 GMT

Hello,

Follow this link for documentation for your N-Class server:

http://docs.hp.com/hpux/onlinedocs/1615/rp7400_customer/index.html

HTH,
Vince

Re: N Class Terminal

Calin Maniu — Tue, 15 Oct 2002 11:12:45 GMT

Well there was a section in it on setting up HP 700 terminals and I followed it to the letter but I still get nothing on the console!!

Re: N Class Terminal

Vincent Farrugia — Tue, 15 Oct 2002 11:31:44 GMT

Hello,

Which cables are you using?

You have to connect the cable like this: 25-pin connector (which really isn't 25-pin) to the left side of the connector on the console... the other end (9-pin) to the W-cable end marked "Console". The W-cable is a cable with 3 ends; one marks "Remote", one "UPS", the other "Console". This W-cable should be connected to the console port on the N-Class.

HTh,
Vince