Cache not available after hard drive replacement

FelixB — Fri, 04 Sep 2020 09:18:49 GMT

Hello,
we have a ProLiant DL380 Gen9. The cache hard disk of an array was defective. We exchanged this again for a 400 GB SAS SSD. Unfortunately we cannot add them to the cache.It shows the defective Disk (already replaced) and the new Disk. Both in Bay1, Slot 1.

Thanks in advance

Re: Cache not available after hard drive replacement

Raviswamy — Tue, 08 Sep 2020 15:48:05 GMT

Hello

kindly make sure the SSD is configured as cache as per HPE document.

https://h20195.www2.hpe.com/v2/GetPDF.aspx/c04123148.pdf

And any change ine cache module pls disable the cach and add SSD and re enable the cache.

Make sure the date is backed up before performing any activity on the storage

if still there is any cocnern kindly reach HPE support team.

Thank you

Ravi swamy

topic Re: Cache not available after hard drive replacement in Servers - General

Cache not available after hard drive replacement

Re: Cache not available after hard drive replacement