topic Re: Creating RAID 5 (Striping with Distributed Parity) in Linux in Servers - General

Creating RAID 5 (Striping with Distributed Parity) in Linux

Nicholasi — Sat, 17 Oct 2020 11:25:39 GMT

In RAID 5, data strips across multiple drives with distributed parity. The striping with distributed parity means it will split the parity information and stripe data over the multiple disks, which will have good data redundancy.

For RAID Level it should have at least three hard drives or more. RAID 5 are being used in the large scale production environment where it’s cost effective and provide performance as well as redundancy Download GarageBand for PC

Re: Creating RAID 5 (Striping with Distributed Parity) in Linux

SanjeevGoyal — Mon, 19 Oct 2020 08:33:06 GMT

Hello,

I hope the below link will help you to understand the raid concept.

Standard RAID levels

https://en.wikipedia.org/wiki/Standard_RAID_levels

Please let me know if you have any other queries.

If you feel this was helpful please click the KUDOS! thumb below!

Regards,