https://community.hpe.com/t5/servers-general/smart-array/m-p/7114900#M13598 <P>I have a DL180 Gen10 server, smart array activated. Connected 3 disks of 2 TB and one of 4 TB. Create a raid 5 with the 3 of 2 TB and a raid 0 with the one of 4.<BR />I had the operating system installed and after a firmware update the server stopped seeing the disks.<BR />Could you tell me how to proceed?<BR />Thank you.</P> Tue, 22 Dec 2020 18:01:58 GMT AndresTA 2020-12-22T18:01:58Z https://community.hpe.com/t5/servers-general/smart-array/m-p/7114900#M13598 <P>I have a DL180 Gen10 server, smart array activated. Connected 3 disks of 2 TB and one of 4 TB. Create a raid 5 with the 3 of 2 TB and a raid 0 with the one of 4.<BR />I had the operating system installed and after a firmware update the server stopped seeing the disks.<BR />Could you tell me how to proceed?<BR />Thank you.</P> Tue, 22 Dec 2020 18:01:58 GMT https://community.hpe.com/t5/servers-general/smart-array/m-p/7114900#M13598 AndresTA 2020-12-22T18:01:58Z https://community.hpe.com/t5/servers-general/smart-array/m-p/7115896#M13685 <P>Hello Andres&nbsp;</P><P>Thank you for contacting HPE Community support .&nbsp;</P><P>The issue as you described seems to be occured after a FW update .&nbsp;</P><P>It might have affected the SA controller on the board.</P><P>Hence I would recommend you to Open a Case with HPE Support Team and get them invetiagte the logs in more detailed way .&nbsp;</P><P>If needed and unit under warranty or contract they will prefer to replace the HW spare gone bad.&nbsp;</P><P>Thank you&nbsp;</P><P>&nbsp;</P> Mon, 04 Jan 2021 11:13:31 GMT https://community.hpe.com/t5/servers-general/smart-array/m-p/7115896#M13685 DeepakJajware 2021-01-04T11:13:31Z