topic Re: proliant microserver gen 8 in Servers - General

proliant microserver gen 8

jds90 — Sat, 02 Jan 2021 11:29:58 GMT

hi, i have setup a hp proliant microserver gen8 running windows 10, have installed 2 x 2tb and 2 x3tb none raid, but when i view in disc management it is only showing one of each......servers are not my forte so any help or advice would be really appreciated to access other drives.......thanks

also when i click on this pc it shows local disk c: 2tb disc d: 3tb and r: ram drive 9.99gb

joe

Re: proliant microserver gen 8

DeepakJajware — Wed, 06 Jan 2021 09:43:28 GMT

Hello

Thank you for contacting HPE Community support .

I would like to start by saying that the configuration you are using is wrong on the server.

As you mentioned Windows 10 is installed , this is an Unsupported OS

Please refer the below link

https://techlibrary.hpe.com/us/en/enterprise/servers/supportmatrix/windows.aspx

Supported OS Are

WS2012
WS2012 R2
WS2016

Once these are installed it will automatically correct the RAID driver.

Thank you

Re: proliant microserver gen 8

jds90 — Wed, 06 Jan 2021 17:44:18 GMT

Many thanks for your reply, its windows 10 enterprise edition i am running, but will look at purchasing one of the server editions you have recommended. Will be good to get all my drives visible so I can use all....
Once again thanks
JoeEx HP, HPCDS and Tarmac IT
Sent from Yahoo Mail on Android