topic 1779-Slot X Drive Array – Replacement drive(s) detected OR previously failed drive(s) now appear to in Servers - General

1779-Slot X Drive Array – Replacement drive(s) detected OR previously failed drive(s) now appear to

matias838 — Fri, 21 May 2021 16:46:04 GMT

Hi everyone!

I have the following issue each time I restart de server...

1779-Slot X Drive Array – Replacement drive(s) detected OR previously failed drive(s) now appear to be operational: Port X Box Y Bay(s) Z

If I configure these disk as logical disk in the HPE Smart Storage Administrator (SSA) I don't have problem to recognize these disks and I could install the Operative System and work with this for a week.

Mi server is a Proliant ML30 Gen9. And the issue are with non official HP harddisk,
I have 2 SATA3 3.5 of 2TB Segate Skyhawk and 1 SSD WD Blue SATA3

I suppose that is a Driver's issue. But is possible that it will be solved with driver update?.

Thanks a lot for your help.

best regards.

Jonas

Re: 1779-Slot X Drive Array – Replacement drive(s) detected OR previously failed drive(s) now appear

Anu_K — Mon, 24 May 2021 04:00:09 GMT

Hello,

I found this to get more details to understand the cause of the issue that you are facing : https://techlibrary.hpe.com/docs/iss/shared/gen9/error/Advanced/Content/247055.htm

However it is recommended to use HPE branded drives as they are tested depending on the server models.

Re: 1779-Slot X Drive Array – Replacement drive(s) detected OR previously failed drive(s) now appear

AmRa — Mon, 24 May 2021 10:00:13 GMT

With reference to Non-HPE Hard Disk Drives with ProLiant Servers, please refer below article.

https://support.hpe.com/hpesc/public/docDisplay?docId=sf000019726en_us&docLocale=en_US