topic Re: ILO SNMP Value Overall Status in Servers - General

ILO SNMP Value Overall Status

rvd92 — Mon, 24 Jan 2022 16:33:13 GMT

Hello,

Can anybody help me? we would like monitor our HPE servers with snmp to Zabbix.

But i have a problem with ILO4. in the webinterface it is all green, no fault.

but response from snmp is:

[ ~]# snmpwalk -v2c -c x.x.x.x x.x.x.x 1.3.6.1.4.1.232.6.1.3
SNMPv2-SMI::enterprises.232.6.1.3.0 = INTEGER: 4

I have triyd to reset ILO en clear the IML log.

Where can i find why is given 4 (Failure) ?

support_s — Sun, 23 Jan 2022 10:12:45 GMT

System recommended content:

If the above information is helpful, then please click on "Thumbs Up/Kudo" icon.

Thank you for being a HPE community member.

rvd92 — Sun, 23 Jan 2022 12:59:06 GMT

Sorry this is not helping for mee, i don't have a Apollo 4200 but a DL360Gen 9 and 10. Also i don't have a failure for FAN.

rvd92 — Sun, 23 Jan 2022 13:39:30 GMT

Oke i don't know why.. but after clear IML logs and resetting ILO it is works normally now.