topic Re: SWC - Console - Terminal Emulation in Servers - General

SWC - Console - Terminal Emulation

Roger Lavender — Mon, 06 Oct 2003 10:37:02 GMT

I have three consoles - 2 under firmware 1.9 and 1 under firmware 1.8. All have connectivity and are configured.

When accessing the console window using either the HP2392 or the VT100 Terminal Types, all I get is garbage on the screen....

Any ideas????

Re: SWC - Console - Terminal Emulation

Pete Randall — Mon, 06 Oct 2003 10:40:36 GMT

Roger,

Try setting the term variable:

export TERM=hp
-or-
export TERM=vt100

Pete

Re: SWC - Console - Terminal Emulation

Ravi_8 — Mon, 06 Oct 2003 10:44:59 GMT

Hi Roger

power off the console.

while powering ON hold ctrl+d, this will set the console to factory defaults.

if you still getting the garbage then press menu key (between F4 and F5) choose terminal config. press F2( for hp, EM100, EM220 etc) press F1 to save. This should resolve your problem.