Issue configuring multiple UPS Management Modules (AF401A)

TT-maa — Thu, 08 Sep 2011 10:27:23 GMT

Hi All!

I'm having some trouble configuring multiple new management Modules. I've configured IP Addresses and updated the firmware of all modules to 2.1.11 this worked fine so far. After I'had configured one module, I saved the config.bin and tried to upload the file with the flash utility (v3.0.5) the other MMs. The utility displays a message about a successful transfer and that the MMs are now flashing and rebooting. But they don't, no reboot, no changes in the config, no entry in the log, no message via console. A manual reboot didn't help. I also tried an other config file and restored a MMs factory defaults and only changed the IP via serial. But the new config is still ignored.... Does anybody got an idea?

Best regards

Matthias

Re: Issue configuring multiple UPS Management Modules (AF401A)

comp2 — Tue, 26 Jul 2022 21:55:46 GMT

did you try removing them from the back of the UPS...

also I need a copy of the firmware anyway you can help me out with that?

topic Re: Issue configuring multiple UPS Management Modules (AF401A) in Servers - General

Issue configuring multiple UPS Management Modules (AF401A)

Re: Issue configuring multiple UPS Management Modules (AF401A)