topic Re: 647594-B21 in Servers - General

647594-B21

ArnaudL — Wed, 07 Sep 2022 07:33:43 GMT

Dear Support, I would like to know if HP Ethernet 1Gb 4-port 331T Adapter (Réf : 647594-B21) can be used with a standard computer (not a HPE ProLiant). Indeed, in this document, there is a list of servers compatibles with this card (https://cdn.cs.1worldsync.com/syndication/feeds/hp-ent/inline-content/SI/A/4/A4545D0964028E9533F03624135AB843C8F8E8D6_source.PDF), so my question. Indeed, I am trying to use this card on ARK-3532D (Advantech: https://advdownload.advantech.com/productfile/PIS/ARK-3532D/file/ARK-3532D_DS(111521)20211118110306.pdf) and MXC-6401D (from Adlink: https://www.adlinktech.com/Products/Download.ashx?type=MDownload&isDatasheet=yes&file=1601%5cMXC-6400_Series_datasheet-en_20180706.pdf), but both do not boot. I hear a long beep followed by 3 short beeps. So I don't know if this is a setting issue in the BIOS or a compatibilty is between standard computer and your HP Ethernet 1Gb 4-port 331T Adapter (Réf : 647594-B21) Thanks for your answer Best Regards Arnaud

Re: 647594-B21

TVVJ — Tue, 06 Sep 2022 14:32:36 GMT

Hello,

All HPE option parts are designed for and tested on the listed compatible servers. The card in question does not require any configuration in BIOS to make it work.

Ideally, it should work in any other system. Access the system's BIOS and check if it is detected therein. If so, then you may have troubleshoot for that system not booting. Refer to the manufacturer's documentation for more information about compatibility and troubleshooting the issue mentioned.

Regards,

Re: 647594-B21

Sunitha_Mod — Wed, 28 Sep 2022 11:06:14 GMT

Hello @ArnaudL,

We do see you have marked the reply as solved. We are glad to know the problem has been resolved.