topic Re: MicroServer Gen8 depoly Samba Server than powerlost in Servers - General

MicroServer Gen8 depoly Samba Server than powerlost

Nyx1197 — Wed, 19 Oct 2022 10:48:14 GMT

MicroServer Gen8 depoly Samba Server than powerlost
I try depoly Samba Server on MicroServer Gen8 to share my disk. When other PC write some large file to share folder, the server lostpower. all led go out, and power button not respon. ILO also don't work. I need disconnect powercable and wait minutes, than reconnection powercable and poweron server.

server configuration:
CPU: Intel Xeon E3 1260L
RAM: HPE SmartMemory 8G x2
TF: Sandisk ultra 64g
Nvme: YMTC tiplus5000
HDD: old 3.5 inch HDD
System: PVE 7.2-11

I already do stuff to try fix that
replace powersupply
replace HDD
reformat disk part to ext4 or ntfs
reinstall ubuntu on VM
install Samba on lxc
reconnected inside plug
add a fan to sourth bridge
replace CPU to original G1610
replace RAM to original 4G RAM
use stress-ng test CPU, RAM, HDD
use iperf3 test network

my english not well, i'm so sorry~
thanks for your help

Re: MicroServer Gen8 depoly Samba Server than powerlost

Suman_1978 — Wed, 19 Oct 2022 08:55:01 GMT

Hi,

As you have performed most of them troubleshooting, here are some documents which might help.

You have mentioned as "CPU: Intel Xeon E3 1260L", this processor is not supported on MicroServer Gen8, please check the QuickSpecs.

Thank You!
I work with HPE but opinions expressed here are mine.
Recent Support Video Releases

Re: MicroServer Gen8 depoly Samba Server than powerlost

Nyx1197 — Wed, 19 Oct 2022 09:12:10 GMT

thanks for your help!

I will replace CPU to original G1610 again. And I will reply in 3days, because i can't touch this server today.

Re: MicroServer Gen8 depoly Samba Server than powerlost

Nyx1197 — Sat, 22 Oct 2022 02:11:16 GMT

I try replace CPU, but it's not working.

When it happen, network is strange. I send a file to samba server, transport speed just only 10M/s, Not 100M/s.
Maybe with a dead network card?

Re: MicroServer Gen8 depoly Samba Server than powerlost

Suman_1978 — Tue, 25 Oct 2022 09:09:31 GMT

Hi,

It could be the NIC issue, but is the server working after installing the original CPU?

Thank You!
I work with HPE but opinions expressed here are mine.
Recent Support Video Releases

Re: MicroServer Gen8 depoly Samba Server than powerlost

Nyx1197 — Tue, 25 Oct 2022 09:25:04 GMT

No, it stuck again. Even I not start any VM.

I restore server hardware configuration to default, include bios configuration. And replace TF card, reinstall Ubuntu Mate 20.04, remove all HDD.

I hope it works.

Re: MicroServer Gen8 depoly Samba Server than powerlost

Nyx1197 — Wed, 26 Oct 2022 06:17:34 GMT

It's hardware issue. It looks like a problem with the motherboard. I replace everything without motherboard and case, but still not working.