topic Re: Configuation Required in Servers - General

Configuation Required

Jalmada — Mon, 21 Nov 2022 14:58:03 GMT

good estimates
I have a problem with my HPE Proliant DL 380 g10+ server when starting up, a Configuration required legend appears and my smart Array does not appear in the SSA
What solution could you give me?

Re: Configuation Required

TVVJ — Mon, 21 Nov 2022 14:33:54 GMT

Hello,

You may try Intelligent Provisioning to configure the server.

Regards,

Re: Configuation Required

msobers22 — Mon, 21 Nov 2022 14:43:57 GMT

You most likely have a MR416 controller isn the server.

The MR416i cannot be configured using SSA. You must cnfigure the controller in System Utilities.

Access System Utilities by pressing F9 during POST
From the System Utilities screen, select System Configuration > HPE MR416i-a Gen10+
Select Main Menu
Configuration Management > Create Logical Drive
Select RAID Level
Select Drives > Apply Changes > Ok
Name the Logical Drive > Save Configuration
Check the Confirm box > Click on Yes - Ok

Hope this helps

Re: Configuation Required

Jalmada — Mon, 21 Nov 2022 14:57:18 GMT

Thank you very much, this worked for me

Re: Configuation Required

Sunitha_Mod — Tue, 22 Nov 2022 03:32:46 GMT

Hello @Jalmada,

That's awesome!

We are glad to know the problem has been resolved.