topic Re: HP Proliant Server to IBM FlashSystem array in Servers - General

HP Proliant Server to IBM FlashSystem array

oldenkafe — Sun, 26 Feb 2023 04:39:56 GMT

We have 2 Hyper-V hosts (HPE Proliant DL380 Gen9) that we are trying to get to communicate to an IBM FlashSystem 5035 array via SAS. We are using an HPE SmartArray P441 controller and unable to get Windows to recognize the array. We seperately had the array communicate with an older Dell PowerEdge just fine, so we believe the array itself is working fine.

Our thought is that the HPE SmartArray controller is only specific to HPE storage arrays (which we do have an MSA 2040 via SAS that is through one of those cards on that server).

Does anyone have experience with this that could tell me if it is likely compatibility with the card that is causing the issue?

Query: HP Proliant Server to IBM FlashSystem array

support_s — Tue, 21 Feb 2023 11:23:41 GMT

System recommended content:

1. Advisory: (REVISED) HPE MSA 2040 and MSA 1040 SAS Arrays - Driver and Firmware Upgrades to Support HPE ProLiant Gen9 Servers and an H241 HBA Controller or HPE Smart Array Controller in VMware ESX/ESXi Environments

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

Re: HP Proliant Server to IBM FlashSystem array

ShruthiSK — Fri, 24 Feb 2023 04:30:40 GMT

Hello,

As you have suspected correctly, due to the unsupported configuration/compatibility issues, the setup that you are trying to configure might not be working.

HPE tests with the HPE hardware which are mentioned in the related hardware quickspecs for the supported hardware/configuration.

Hence we would not be able to comment further on this as the setup configured might work as with older Dell PowerEdge or it might not work as with IBM FlashSystem 5035 array, as confirmed by you.

Hope this helps.