topic Re: Intelligent provision upgrade doesn´t work with new USB 3.81 in Servers - General

Intelligent provision upgrade doesn´t work with new USB 3.81

ZEHETAL — Tue, 02 May 2023 04:21:11 GMT

We tried to update our HPE Proliant DL380 Gen10 with a new Intelligent Provision package 3.81, but the USB Stick didn´t boot and wasn´t seen in the boot menu. We retried the recovery media generation with several usb sticks, but there was no change in behaviour. We generated the USB sticks with the tools USB Key, Rufus and "ISO to USB". In the following we used the Intelligent Provisioning Recovery Media 3.76 and the USB key was seen by the boot menu and we could flash the Intelligent Provisioning.

Is there any special issue known with the new version of IP 3.81?

Re: Intelligent provision upgrade doesn´t work with new USB 3.81

Chris_Coates — Mon, 24 Apr 2023 12:03:56 GMT

This isnt just with the new version. I have had problems with Intelligent Provisioning recognising virtual media for years. It can be very intermitent. I often get frustrated and just boot the iso and install the HPE tools after. Not ideal but often the only option.

Query: Intelligent provision upgrade doesn´t work with new USB 3.81

support_s — Mon, 24 Apr 2023 12:45:20 GMT

System recommended content:

1. HPE ProLiant DL380 Gen10 Server - USB Keyboard and Mouse is not Working in Operating System

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

Re: Intelligent provision upgrade doesn´t work with new USB 3.81

Robertreese — Wed, 26 Apr 2023 04:38:43 GMT

The user attempted to update their HPE Proliant DL380 Gen10 with the new Intelligent Provision package 3.81, but the USB stick did not boot and was not seen in the boot menu. They tried using several different USB sticks generated with various tools, but the behavior did not change. However, when they used the Intelligent Provisioning Recovery Media 3.76, the USB key was seen by the boot menu and they were able to successfully flash the Intelligent Provisioning. The user is wondering if there is a known issue with the new version of IP 3.81 that could be causing this problem.

Re: Intelligent provision upgrade doesn´t work with new USB 3.81

Bunsol — Fri, 28 Apr 2023 04:34:18 GMT

If you are able to mount the ISO via ILO and facing issues only when using a USB then try to use the HPE USB Key Utility and check:-

https://support.hpe.com/connect/s/softwaredetails?language=en_US&softwareId=MTX_357c87ee9b054ad7a631d9eaba&tab=Installation+Instructions